top of page

Mid Size Tools

Our Mid Size gives you greater versatility for bowls, plates, lidded boxes, and other projects. They're the perfect go-to tool!
MidSize Set.png
America-Flag-PNG-Image.png

Made in America

Handles are one-of-a-kind grained American Maple with a copper ferrule that gives strength. All tools come with a fresh standard carbide cutter already installed and a hex key that fits the mounting screw. Three types take your creation from start to finish, in three colors so you'll know which to reach for:

Ci2SQ.jpg

EASY ROUGHER™ (square cutter):
Removes bulk material fast and efficiently. 

Ci3.jpg

EASY FINISHER™ (round cutter):
For inside and outside curves and final shaping.

Ci4.jpg

EASY DETAILER™ (diamond cutters):

Creates small coves, beads, and other fine details.

Ci7.jpg

MICRO-SIZE EASY DETAILER™ (diamond cutter, natural handle):
Creates micro coves, beads, and other ultra-fine details. 

Handle: 14"

Tool Bar: 3/8" x 7"

Maximum Reach: 3"

Overall Length: 21"

Tool bars are engraved with corresponding carbide cutter part numbers,

so it’s easy to know which cutter goes with which tool!

Mid Size Tools Come with a Standard Carbide Cutter:

  • Rougher: Ci2-SQ

  • Finisher: Ci3 

  • Detailer: Ci4 

  • Micro-Size Detailer: Ci7 

Optional Carbide Cutters Sold Separately:

  • Standard Rougher: Ci2-R2 (radius)

  • Negative Rake

    • Rougher: Ci2 R2 NR​ (Pat. No. D902968)

    • Finisher: Ci3 NR (Pat. No. D902967)

    • Detailer: Ci4 NR (Pat. No. D902966)

    • Micro-Size Detailer: Ci7 NR (Pat. No. D902966)

  • Beading Cutters​ - For Rougher Only

    • 1/8" Diameter Negative Rake Beading Cutter ​

    • 3/16" Diameter Negative Rake Beading Cutter

    • 1/4" Diameter Negative Rake Beading Cutter

    • 3/8" Diameter Negative Rake Beading Cutter

Our high quality lathe turning tools make turning safer, faster, and more fun! Whether you're a newbie or a pro, we have the best tools for your next project.

  • Easy to use: Unlike traditional steel, our carbide-tipped tools are always held flat on the rest and parallel to the floor. No bevels, no vertical angles to worry about.

  • Short learning curve: Cut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool. 

  • Our own carbide: We manufacture our carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business.

  • Lower cost of ownership: All you need is a lathe and an Easy Wood Tools turning tool and you can start making. You don't need to buy a grinding kit or sharpening system or multiple tools to achieve your desired result.

  • No sharpening: Never sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter. 

  • Safer: Our square tool bar design and resultant turning geometry means fewer catches and kick-backs.

  • Unique Handle Design: Our unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort.

  • Handmade in America: Our team of highly skilled men and women use time-tested techniques and American-sourced woods, metal, and carbide to make our high quality tools.

  • We focus only on turning: EWT sells ONLY turning tools and accessories, so we know how to make turning safer, easier, better, and more fun.​

bottom of page