Hollowing

Hollow your forms with confidence! Our unique Easy Hollower™ tool design gives you a wide range of access, from just-under-the-rim to deep, unseen cavities. Hollowing is Easy as 1 - 2 - 3

Made in America

Hollow forms can be tricky for turners because you can’t see inside the form that you're turning, and chips and blowouts can happen quickly. But we make turning hollow forms easier and safer with our flat-bottomed tool bar and three distinct hollowing tools, in three sizes: Mini, Mid, and Pro. Our Mini Easy Hollower™ tools are perfect for small ornamental projects and tiny hollow forms; our Mid-Size Easy Hollower™ tools work great on medium to large bowls, projects and hollow forms; and for the most extreme large projects and deep-hollow forms our Pro-Size Easy Hollower™ will tackle the job without the need for any additional equipment. No matter the size of your hollowing project, Easy Wood Tools has you covered.

Handles are one-of-a-kind grained American Maple, with a copper ferrule that gives strength.

All Mid and Pro Easy Hollower™ tools come with a Standard Carbide Cutter already installed and a hex key that fits the mounting screw.

Mini Easy Hollower™ tools come with a *Negative Rake Carbide Cutter™ already installed and a hex key

that fits the mounting screw. *Pat. No. D902967

Mini

Mid/Pro

Easy Hollower™ #1 - This straight bar removes material from the center of the vessel.

Easy Hollower™ #2 - The slight curve of this tool lets you start the curved portion of your hollowed form.

Easy Hollower™ #3 - This curve lets you get right up to the inside lip of your work.

STANDARD

Standard

MID SIZE: #1

Handle: 14"

Tool Bar: 1/2" x 8 1/2"

Maximum Reach: 4"

Overall Length: 22 1/2"

MID SIZE: #2 and #3

Handle: 14"

Tool Bar: 3/8" x 3/4" x 3 1/2"

Maximum Reach: 4"

Overall Length: 21 1/2"

PRO SIZE: #1

Handle: 20"

Tool Bar: 1/2" x 3/4" x 12"

Maximum Reach: 8"

Overall Length: 32"

PRO SIZE: #2 and #3

Handle: 20"

Tool Bar: 1/2" x 1" x 9 1/2"

Maximum Reach: 6"

Overall Length: 29 1/2"

Tool bars are engraved with corresponding carbide cutter part numbers,

so it’s easy to know which cutter goes with which tool!

Mid-Size Hollowers come with a Standard Carbide Cutter:

Pro-Size Hollowers come with a Standard Carbide Cutter:

Optional Negative Carbide Cutters Sold Separately:

Negative Rake: Ci5 NR (Mid-Size) (Pat. No. D902967)
Negative Rake: Ci3 NR (Pro Size) (Pat. No. D902967)

MINI EASY HOLLOWER™

Hollow forms can be especially difficult when your medium is a four-inch piece of wood and your tools are full sized. With EWT’s mini-sized hollowing tools, turning small items like ornaments, mini vases, and other hollow shapes is safer and easier.

Our Mini Hollowers are designed specifically for small hollow forms. At 15.25 inches, each Mini Hollower has a straight, slightly angled (45 degrees), or L-hook (90 degrees) configuration on a square-shaped bar with easy-to-grip American maple handle.

The Mini Easy Hollowers™ come equipped with our Patented Negative Rake Carbide Cutters™ for better control with a less aggressive cut; the Negative Rake Carbide Cutter minimizes the severity of unexpected catches that can occur when creating a hollow form. Their square-shaped tool bar design provides a shorter learning curve, too; the resultant parallel turning geometry means fewer catches and kick-backs overall.

Mini Hollowers are sold separately.

Mini

Mini Easy Hollower™ #1 - This straight bar removes material from the center of the vessel.

Mini Easy Hollower™ #2 - The slight curve of this tool lets you start the curved portion of your hollowed form.

Mini Easy Hollower™ #3 - This curve lets you get right up to the inside lip of your work.

MINI

MINI

Handle: 12"

Tool Bar: 5/16" x 3 1/4"

Overall Length: 15"

Tool bars are engraved with corresponding carbide cutter part numbers,

so it’s easy to know which cutter goes with which tool!

Easy Mini Hollowers™ come with a Negative Rake Carbide Cutter:

Ci5 NR (Pat. No. D902967)

Optional Carbide Cutter Sold Separately:

Standard: Ci5

SHOP ALL PRODUCTS

Our high quality lathe turning tools make turning safer, faster, and more fun! Whether you're a newbie or a pro, we have the best tools for your next project.

Easy to use: Unlike traditional steel, our carbide-tipped tools are always held flat on the rest and parallel to the floor. No bevels, no vertical angles to worry about.
Short learning curve: Cut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool.
Our own carbide: We manufacture our carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business.
Lower cost of ownership: All you need is a lathe and an Easy Wood Tools turning tool and you can start making. You don't need to buy a grinding kit or sharpening system or multiple tools to achieve your desired result.
No sharpening: Never sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter.
Safer: Our square tool bar design and resultant turning geometry means fewer catches and kick-backs.
Unique Handle Design: Our unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort.
Handmade in America: Our team of highly skilled men and women use time-tested techniques and American-sourced woods, metal, and carbide to make our high quality tools.
We focus only on turning: EWT sells ONLY turning tools and accessories, so we know how to make turning safer, easier, better, and more fun.