Easy Wood Tools offers a series of replaceable carbide cutter woodturning tools that address fatigue, safety and efficiency like no other tools. They are designed to effortlessly remove massive amounts of material on any woodturning project without the need for sharpening. The tools are designed with support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to take the pressure that normally would go to your hands and body when roughing.
Our goal here at EWT is to step back and take a fresh look at the methods we use in woodturning. We have made every effort to eliminate the parts of woodturning that decrease our enjoyment:
- No Sharpening! - No need to spend time sharpening with replaceable carbide cutters. Just rotate cutter when one side gets dull and when you've used all the sides, just replace with a new cutter.
- Reduced kick-back and catches - Due to the neutral cutting angles, the tool is easy to use.
- Reduce Fatigue - Pressure goes into the tool rest so your body doesn't get tired as quickly which equals more turning time.
- No bevels to learn - Our tools are held flat on the rest and parallel to the floor. Cut left, right or straight in within minutes of picking up the tool.
The Easy Rougher tool is the easiest, most efficient roughing tool you will ever use. We guarantee that 100%.
Kurt Hertzog loves the new Easy Chuck
The most recent addition to the woodturning chuck market comes from the Easy Wood Tools Company. Most widely known for their families of carbide cutter woodturning tools, they also produce faceplates and smocks for the woodturning community. The Easy Chuck is the first product from Easy Wood Tools in the woodturning chuck arena.
From first appearances, the Easy Wood Tools Easy Chuck body looks very similar to the mid sized body chucks available from many other manufacturers located throughout the world. The EWT chuck is packaged nicely in a sturdy high gloss black box adorned with the EWT logos and colors. It looks a bit different as soon as you remove the chuck from the box. The chuck has a different colored ring that runs around the back. In addition to the chuck, the box contains the instruction manual, T-handle chuck wrench, a handled ball end key wrench, and a bag with a spindle washer, replacement springs and grub screws.
For more on this review, click here